How to test microphone in windows xp

Whenever you are facing an audio problem, a structured guide can be very useful in assisting you to navigate the issues. In case your audio card uses the jack sensing technology, make sure that you select the proper device when asked about it. Follow the green for speakers, pink for the microphone. In some cases, you can see that the media player you are using is giving you errors or you can also check the device manager and see an error on the audio device.

Typical examples of sound errors in a Windows XP are:. It is also possible that there is no error, but, there is simply no sound, or sound is not working on the internet pages, the sound is of bad quality. In all these cases there could either be an audio configuration problem or even a driver problem. We have collated some steps that will help you in fixing the issue. Now, instruction will vary per motherboard so you will need to follow the instructions in your PC or motherboard manual for this.

If you are using a separate sound card, then the onboard should be disabled. If the device is not listed then check if any devices are listed in the Other devices or Unknown devices group. This should be most likely marked with a yellow exclamation mark,. If you have a sound driver for the sound device the simply reinstall the sound drivers. In case you do not have the drivers then the easiest method would be to use a driver update tool instead.

Click Ok when done. Once you have checked these, simply click OK. The Volume Control will show you a mixer and this also depends on the audio device which is installed. Clear all the Mute checkboxes. This can be checked by selecting Administrative tools in the Control Panel. Then simply double click on the Component services and this will now open a separate window.

In the left-hand pane, simply click on the Services Local. Now on the right-hand pane, scroll down to the Windows Audio service and make sure that this is not disabled. Right-click Windows Audio and in the pop-up menu simply select Properties and then set the startup type to Automatic.

Even after following these steps if the sound issues still persist then there are chances that the underlying problem could be with the sound settings in the application that you using. If the sound problems are present with all the applications then the issue could be with the hardware.

Testing the computer's sound hardware, with Windows XP. Information For Windows XP, follow these steps to test the computer's sound hardware, including microphone and speakers: Determine, from the User's Guide, whether or not the computer has a built-in internal microphone.

If not, then plug an external microphone into the microphone input jack. If it's not already selected, select Recording under "Adjust volume for" , then click the OK button. If it's not already checked, check the Select box for the microphone channel. Move the volume slider for the microphone to roughly the midway position.

Click the category "Sounds, Speech, and Audio Devices". Click the "Sounds and Audio Devices" icon. Click the Voice tab. Click the "Test hardware Wait a minuter or two for the wizard to complete tests of the internal sound hardware.